Welcome to the Speakerbuilder.net discussion forum. While being polite and respectful is not common on the internet, please try not to flame people who don't deserve it. Otherwise, go nuts.
I believe I have all the necessary electronic parts from PartsExpress to build the Topaz speaker listed on the projects page, except perhaps for enough fill. Check it for yourself if interested.
299-712 6.5" Dayton Shielded cast frame woofer (2)
276-152 Audax 1" Textile dome tweeter (2)
260-317 Acousta-stuf polyfill 1 lb. bag
260-309 Gold high power terminal rectangle (2)
266-830 1.30mH 18 GA perfect layer inductor (2)
266-820 .70mH 18 GA perfect layer inductor (2)
266-800 .10mH 18 GA perfect layer inductor (2)
027-423 Dayton 5.1uF-250V polypropylene capacitor (2)
027-421 Dayton 4.0uF-250V polypropylene capacitor (4)
004-8 Dayton 8 ohm 10W non-inductive resistor (2)
004-6 Dayton 6 ohm 10W non-inductive resistor (4)
260-402 Port tube 1.5" x 4" flared (2)
Roughly $125 in parts all new in the box, never been out of their respective compartments. Take it all for $90 and I'll toss in shipping.
You can pay through my paypall account if you have one. If not, certified check.
Thanks, and happy speakerbuilding. Maybe next year for me.
Don