Thanks jIyajbe,

Those were pretty much the exact answers I was looking for...

Has anyone else matched these up to dedicated subs???

If so, any recommendations on a DIY sub kit/plans??? And, how did you handle the crossover between the EROSs and the subs.. Any ideas???

Thanks again for all the great info,
Mark

I've personally built the Eros with both MKI and MKII xover but I found them too bright for my own taste. On some recording, there are just way too much sibilance and the upper treble sounds too harsh.

I then reduce the 5ohm (in parallel with the tweeter) down to about 4.75 ohm (I used 10ohm//9ohm) which brings then treble down to a more acceptable level but still I found still too bright. I then try to reduce the resister down to 4.5 ohm but I think it had some affect on the midrange frequency.

The Eros has some nice quality but in the long run I just couldn't live with it.